I want to know what AT command should be sent to the modem to get time? But I need to set it automatically through cell tower.The tower can send the time to the modem when requested using an AT command.The Samsung Galaxy A8 has a metal frame with a curvature very similar to that of the Galaxy S6, but the glass on the back has been replaced by aluminum, as is typical for the A-series.


Dating via gsm
I have seen in many phones that the time is updated during hand-offs. successfully in products using three different cell modules: Enfora, Telit, and Sierra.
The fact that it uses a character after the AT implies it is a common (as opposed to proprietary) command, and should be available on most if not all cell modules.
On the back you will find two cameras - 20 MP and 12 MP while the fingerprint sensor will move to the front, doubling as a home button.
After the official launch in Shanghai, the phone is expected to be announced in Berlin for the European market on June 27.
The poster roughly says Beautiful and Colorful under the "9" logo.
It also stars the famous Chinese actor and singer Hu Ge with silver hair.
The camera setup consists of a 16MP main shooter, which, according to previous rumors is not identical to the one in the S6 and S6 edge and has a reduced pixel size of 1.0 m to conserve space. Another high-end feature present in the Galaxy A8 is a fingerprint reader, just like the flagship models.
The unit is powered by a 3,050 m Ah battery and Samsung promises 304 hours of standby time.
The motion detection range is the distance from the camera that the camera will sense motion and be activated.
Both of these ranges will be effected by many different factors.
So there is no need for a separate RTC to keep time. If the value returned is 0 it means network time updating is disabled. So even if the modem is restarted CLTS will be enabled.